Sewing Is So Mathy and Mystery Solved

On June 30, I wrote:
Next up will be a 5- or 7-gored skirt. I tried to make one with inseam pockets, but it was not wearable because I didn't allow for the pulling (the pockets open) that would occur. That pulling emphasizes my tummy. Oh, no! I don't know quite how to overcome that, so this next skirt will be with or without pockets.

I increased the width of the panels of 7-gore skirt that I'm working on now by 1/4" per side = 1/2" per panel—because of my previous skirt attempt described above. That would result in a skirt that fits and has a bit of ease.

Before stitching the seams of this skirt, I referred to my notes and stitched 3/8" seams on 5 of the 7 seams, leaving 2 seams unsewn to allow for making inseam pockets before stitching those last 2 seams. So far, so good.

In preparation for the pockets, I read the pocket notes I could find, did a bit of online searching, created a pocket pattern piece, and was ready to sew the pockets. "Wow," I thought, "this is going great!"

Only because I'm very thorough, I decided to look at the too-small skirt, just to confirm my plan for the pockets. Well, how-dee-do. I stitched the seams of the too-small skirt with 1/2" seams INSTEAD OF THE 3/8" SEAMS called for in the pattern instructions.

Mystery solved. So that's why the skirt was too small. Think that 1/8 of an inch (the difference between the instructions and what I did) doesn't matter? Read on...

1/8" x 14 (the number of panel sides, 7 panels x 2 sides per panel) = 1.75".

So I sewed the skirt almost 2" narrower than I should have. There went the wearing ease.

For my current skirt, I had added 1/4" to each panel side:
1/4" x 14 (the number of panel sides, 7 panels x 2 sides per panel) = 3.5". This would give me plenty of ease. Actually a bit more than I needed, but I decided that I didn't want to fiddle with adding less than 1/4" per side (too much work).

So, when you correct the seam allowance error (1.75") + the newest skirt allowance (3.5"), the total is now 5.25". Of wearing ease. Too much. Which I confirmed by pinning the remaining seams and trying it on.

So now... my plan is to stitch these seams 7/8", which will reduce the overall width by 2". (I will then add the pockets, then trim the seam allowance.) In other words, the newest skirt will have 3.25" wearing ease. Which is very close to the wearing ease of the previous skirt—if I had sewn 3/8" seams instead of the 1/2" seams that I sewed. These 4 panels will be a bit narrower than the other 5, but I am currently striving for something that is wearable.

Anyway, see what I mean about failure?

On June 29, I wrote (near the end of the post):
Failure means I'm learning. Growing. Improving. Alive. Doing something. Living a life.

Lesson learned: Double, maybe triple check the instructions and previous versions of the same project.

I'll leave perfection for others. What's that saying? "Perfection is the enemy of the good." "Perfection is the enemy of done." "Perfection is the enemy of completing a garment sewing project that is wearable." <- My adaptation, which I just might have to print and frame in my sewing room!

Ha ha. Posting about my failures (instead of only the successes) is certainly giving me more to talk about!

Blessings and peace...